 |
 |
 |
|
 |
| Home About News Forums Link Me Contact Products Chassis Suspension Shocks Hop-ups Gears Steering Bearings Wheels Tires Foam Inserts Motors Batteries Electronics Servos ESC's Bodys Decals Stock Parts Old School Parts View by Company Discontinued Parts |
 |
 |
ClodParts.com does not sell any of the products listed on this site. ClodParts.com is just an information collection on parts for the Clod Buster. Any sales between seperate stores listed on this site are between you and that store.
|
CPE is proud to introduce our new planetary hub covers for the Clodbuster. We wanted to add a touch of realism to the Clodbuster wheel, without redesigning the entire wheel. These are a perfect compliment when used with our CPE-RNG10 replica beadlock ring! Both current race trucks as well as that stock "Retro Class" Clodbuster look great with these added for realism. 
These are laser cut to duplicate the look of the real beadlock rings used on the full-size monsters. These fit inside the outer rib on the stock Clodbuster or TXT wheel and glue directly to the wheel.
Use these wheel spacers to extend your Clodbuster axles 3/4" per side. These CNC machined 6061 aluminum spacers allow for the use of the stock drive hex, provide a 3/4" offset per side, and work with any wheel having a 12mm hex drive system (2.2 sized wheels).
CPE is now offering a CNC machined 3/4" offset wheel spacer for your Clodbuster. This design still allows for the use of the stock drive hub and wheel, but eliminates having to drill a hole pattern in your wheel. This kit also provides the added width necessary for high-speed stability.
hese wheel adapters allow for the use of any 14mm hex drive wheel on your Clodbuster crawler. CNC machined from 6061 aluminum, these spacers allow for the use of the stock 12mm drive hex and provide a 1" offset per side.
Use these wheel adapters to allow for the use of any 14mm hex drive wheel on your Clodbuster crawler. These CNC machined 6061 aluminum spacers allow for the use of the stock drive hex and provide a 1" offset per side, and work with any wheel having a 14mm hex drive system (Maxx sized wheels).
Kit will increase vehicle stability by increasing overall wheel width.
High clearance 6061 aluminum 4-link bars designed to optimize ground clearance for your crawler.
Add these Terminator style skull 4-link mounts to your truck for that unique look! These mounts use the stock steering servo location and give that different look for those not wanting to run our high performance CNCd CPE-4LMTHD versions.
These aluminum upper 4-link mounting brackets are a direct bolt-on to your stock Clodbuster gear cases and provide a fixed point for mounting of the upper 4-link suspension arms. Made from 1/8 thick aluminum, these have adjustable mounting points to allow for fine tuning for your suspension. All necessary installation hardware is included.
These CNC machined 6061 aluminum lower 4-link bars allow for the secure mounting of both sway bars and/or shocks in a variety of locations.
17 inch aluminum 60/40 4-link kit.
17 inch aluminum 50/50 4-link kit.
This kit works on all our chassis and provides a ¼" spacer between the upper shock mount and the chassis side plate. These machined upper shock mounting spacers have a ¼" OD with a 3/16" OD turned area for mounting inside the shock and are drilled for 4-40 mounting hardware. This kit includes enough spacers for 4 shocks.
This kit increases clearance between your steering linkage and chassis, while making your truck 1/2" taller! Our kit comes with four mounting plates and all required mounting hardware.
This kit when used in conjunction with our custom center chassis will result in a wheelbase of approximately 11". 14", or 16" using Clodbuster axles. Balls are sized for #4-40 mounting hardware. Comes in Aluminum or Carbon fiber.
This kit when used in conjunction with our custom center chassis will result in a wheelbase of approximately 11". 14", or 16" using Clodbuster axles. Balls are sized for #4-40 mounting hardware. Comes in Aluminum or Carbon Fiber.
This kit when used in conjunction with our custom center chassis will result in a wheelbase of approximately 11". 14", or 16" using Clodbuster axles. Balls are sized for #4-40 mounting hardware. Comes in Aluminum or Carbon Fiber.
Clodbuster BTA (Behind the axle) steering kit for both crawlers and racers. This kit combines our CPE-SER2 stainless steel servo mounting bracket with a heavy-duty stainless steel cross-bar. No more snapping the bar that comes with some other kits!
This high quality stainless steel mount allows for multiple servo mounting configurations depending on your application. This design maintains the mounting points on the stock Clodbuster axle tubes. We've also allowed for the installation of the ESC or split battery pack on the top side of the mount. 
Take the next step up from our CPE-LOC1 steering lockout kit and add our custom 1/4" aluminum or carbon fiber links to the package! 
These heavy-duty aluminum or carbon fiber links are a direct replacement for your stock Clodbuster steering linkages. This steering kit requires no modification to the stock Clodbuster steering and is a direct bolt-on replacement.
These heavy-duty aluminum links are a direct replacement for your stock Clodbuster steering linkages. This steering kit requires no modification to the stock Clodbuster steering and is a direct bolt-on replacement.
Use this machined aluminum rear steer lockout bracket on that custom Clodbuster project to eliminate rear steering. This bracket is a direct fit on the Clodbuster gearcases, and provides a sturdy point to lock out the rear steering.
Tired of breaking your stock plastic servo savers? Add our aluminum steering linkage kit and eliminate breakage and sloppy steering on your stock Clodbuster. This kit includes two complete sets of aluminum steering linkages (enough for one complete truck).
This bracket mounts directly to your gearbox support arms with the included hardware.
This hitch is designed as a bolt-on to your Clodbuster and allows for a infinitely adjustable hitch location. The supplied hardware also provides the lockout of your rear steering. The increased height adjustments allow you to custom tune your hitch height depending on track conditions.
Enhances look of your Clodbuster. Give your clod that oldschool look!
Adds strength to outside of axle tube
Adds strength to inside of axle tube
A must-have for the serious rock crawler! These differential lockers are designed to lock your Clodbuster axle for maximum traction over any surface. Our kit replaces the BG1 and BG3 gears in your gearbox and is easily interchangeable with your stock gears so you can go from locked to unlocked quickly. CNC machined from 6061 aluminum, there are no plastic/delrin hexes to wear out over time.
The very popular Terminator Race chassis by CPE! Available in your choice of aluminum or carbon fiber!
The very popular Terminator Race chassis by CPE! Available in your choice of aluminum or carbon fiber!
Get all of the parts needed for your Clodbuster project in one convenient package! 
Get all of the parts needed for your Clodbuster project in one convenient package! 
The Claw chassis uses an innovative suspension design that allows up to 80 degrees of articulation without the use of shocks. The chassis as pictured has a 17" wheelbase with 4.5" of center chassis clearance. The complete chassis with body mounts and suspension including links weighs in at only 12.5 ounces!
17 Inch Wheelbase Kit (60/40). Get all of the parts needed for your Clodbuster crawler project in one convenient package! Our innovative Claw complete rock crawler chassis kit starts with our 17" Wheelbase Claw Shockless Crawler Chassis with a 60/40 chassis placement
17 Inch Wheelbase Kit (50/50). The brand new Claw chassis uses an innovative suspension design that allows up to 80 degrees of articulation. The chassis as pictured has a 17" wheelbase with 4.5" of center chassis clearance.
This chassis center is the basis for our most popular chassis kit. Designed to handle everyday punishment, this chassis can work effectively as a crawler or a racer. This compact chassis allows for a maximum axle articulation of nearly 90 degrees!
The Claw chassis uses an innovative suspension design that allows up to 80 degrees of articulation without the use of shocks. The chassis as pictured has a 17" wheelbase with 4.5" of center chassis clearance. The complete chassis with body mounts and suspension including links weighs in at only 12.5 ounces!
This fully assembled package combines our center chassis and 4-link suspension arm kit
This is the base version of the popular Terminator aluminum race chassis. This starter kit is perfect for the person looking for the Terminator look on an everyday bashing chassis, and doesn't need all the race specific upgrades.
