Click Here To Visit This Fine R/C Site!

    Home
    About
    News
    Forums
    Link Me
    Contact

  Products
    Chassis
    Suspension
    Shocks
    Hop-ups
    Gears
    Steering
    Bearings
    Wheels
    Tires
    Foam Inserts
    Motors
    Batteries
    Electronics
    Servos
    ESC's
    Bodys
    Decals
    Stock Parts
    Old School Parts

  View by Company


  Discontinued Parts
    Flash Back Stories

Hop-ups Break Down
 - Rod Ends
 - Knock Offs
 - Motor Mounts
 - Wheelie Bars
 - Pulling Hitches
 - Gear Box's & Axle Tubes
 - Body Mounts
 - Bumpers
 - Axles

Look above for break downs in this catagory. Please note, not all products madea specific breakdown!

ClodParts.com |

 

   JPS Servo Saver
Aluminum Servo Saver.
   Crawford Performance Engineering Pulling Hitch
This hitch is designed as a bolt-on to your Clodbuster and allows for a infinitely adjustable hitch location. The supplied hardware also provides the lockout of your rear steering. The increased height adjustments allow you to custom tune your hitch height depending on track conditions.
   Hot Racing Clod Steel HD 8mm CV shafts
High strength steel and the added 2mm improved durability, hard chromed for a durable black finish. Fully rebuildable to add extra life when it comes time for maintenance Universal joints deliver more efficiency than the stock dog bones It will accept most 14mm wheel and Hot Racing 17mm or 23mm hex hub.
   Hot Racing Black Adjustable Motor Mounts Clod
Allow the use 6 to 13 tooth Long pinion gears Also serve as Motor Heat Sink
   Hot Racing Clod Gear box w/ adj motor mount
A solid block of 6061-T6 aluminum, CNC-machined to fit the Clod Buster without modifications. The motor mount is fully adjustable and allows the use of pinion gears of various sizes. 6061-T6 Aluminum construction, silver in color
   Hot Racing Clod Rock Crawler SD shaft tube
Bushing support kingpins for super smooth steering action. Smaller c-hub make it for possible 2.2 in wheel. CNC 6061-T6 Aluminum construction, silver in color
   Hot Racing Drive shaft tube w/ Bearing c-hub
Bearings support kingpins for super smooth steering action. CNC 6061-T6 Aluminum construction, silver in color (Now with no steering limenter)
   Hot Racing Clod Rock Crawler SD LONG shaft tube
15mm widen track on each side (total 30mm) Bushing support kingpins for super smooth steering action. Smaller c-hub make it for possible 2.2 in wheel. CNC 6061-T6 Aluminum construction, silver in color
   ESP Twin-Tube Rear Bumper
This is a "twin-tube" style rear bumper for the Tamiya Clodbuster kit. All aluminum construction provides protection.
   RCGUY Clear Dustcover kit
The kit includes 2 clear plastic dustcovers for the Clod Buster gearbox. These covers make installing and setting up your motor and pinion much easier.
   New Era Models Adjustable motor mount
Clodbuster Adjustable Motor Mount. Allows different pinion gear sizes to increase speed or torque.
   JunFac Black Bumper with Skid Kit
Bumper & Skid plate will protect gearbox from rough road surface. Black anodizing finish.
   JunFac Bumper with Skid Kit
Bumper & Skid plate will protect gearbox from rough road surface.
   Crawford Performance Engineering Satin Finish Aluminum Bed Liner
Enhances look of your Clodbuster. Give your clod that oldschool look!
   ESP Front Bumper with Brush Guard
This is a twin-tube front bumper with brush guard for the Tamiya Clodbuster. It features heavy duty solid aluminum construction with a built-in brush guard. Bolts on with no modifications.
   Crawford Performance Engineering Clodbuster Outer Axle Stiffener (Set of 4)
Adds strength to outside of axle tube
   Crawford Performance Engineering Clodbuster Inner Axle Stiffener (Set of 4)
Adds strength to inside of axle tube
   Thunder Tech Racing Clodbuster Straight Axle kit
Stronger than stock axles (8mm outer axle)
   Thunder Tech Racing Clodbuster CVD Axle kit
Stronger than stock axles (8mm outer axle)
   RC4WD Chrome Plated Steel Skid Plates
Aluminum skid plates get eaten by rocks over time, therefore it will get stuck by rock during crawling due to uneven surface, a problem that you wont experience much with these steel skid plates.
   ESP Twin-Tube Lower Bumper
Twin-Tube Lower Bumper.
   JPS Twin Motor Aluminum Gear Box
Takes your truck to a whole new level of power and acceleration with phenomenal reserves of torque. Support 2 motors per gear box, which brings to 4 motors per truck!
   New Era Models Rear Tall SUV Velcro Body Mounting System
Rear Tall SUV velcro body mounting system for super clodbuster tube frame
   New Era Models Rear Velcro Body Mounting System
Rear velcro body mounting system for super clodbuster tube frame
   New Era Models Front Velcro Body Mounting System
Front velcro body mounting system for super clodbuster tube frame
   New Era Models insert panel
Fits in most New Era Bumpers (Many styles listed on this page).
   New Era Models Titanium Frontor Rear Bumper
Super Clodbuster Titanium Front or Rear Bumper Formed from 6AL/4V Titanium with a Satin Finish (2 Pieces).
   New Era Models Wheelie Bar
Skid/Bumper Package for SCT511. Including SCT320sd, SCT322X, SCT322Z, SCT343
   New Era Models Billlet Grill with Bump
Super Clodbuster Billet Grill Guard with Bumper Front or Rear
   New Era Models Right Angle Body Mounts
Right Angle Body Mounts.
   New Era Models Wheelie Bar
Super Clodbuster Wheelie Bar is designed with the proper geometry to actually stabilize the truck when the front wheels have been lifted. Real Rubber tires are included to control the landing and allow the truck to "ride" a wheelie. The wheels and axle are mounted to a CNC machined 6061-T6 Aluminum plate which attaches to the skid plate holes.
   New Era Models Front or Rear Bumper
Super Clodbuster Front or Rear Bumper High Luster CNC machined Billit 6061-T6 Aluminum with Radial Edges, 1/4 inch thick (6mm). Features a license plate pocket.
   New Era Models SD Skid Plate with FLAMES
Super Clodbuster SUPER DUTY Silver Front or Rear Skid Plate with FLAMES are CNC machined and formed from 6061-T6 Aluminum. 3.2mm (1/8 inch) thickness offers great protection while remaining light weight to maintain performance.
   New Era Models SD Skid Plate
Super Clodbuster SUPER DUTY Silver Front or Rear Skid Plate are CNC machined and formed from 6061-T6 Aluminum. 3.2mm (1/8 inch) thickness offers great protection while remaining light weight to maintain performance.
   New Era Models CNC Aluminum Bumper Braces
Super Clodbuster CNC machined aluminum bumper braces (pair) for the bumper system and the servo mount. Will also work with original Clodbuster.
   Thunder Tech Racing Rear Frame Rails & "Sky Wheelie" bar kit for Ripper & Ripper Pro
This kit bolts on in less that two minute to provide your truck with the perfect balancing point. This translates to the worlds easiest "Sky Wheelies" posable.
   Thunder Tech Racing Sky Wheelie Bar kit for Tremor & Centurion-LTD
This kit bolts on in less that one minute to provide your truck with the perfect balancing point. This translates to the worlds easiest "Sky Wheelies" possible.
   G-made Duralumin Bumper Set
This Bumper firmly fixed onto gearbox will protect your car and its servo from the impact of accidents and allow you to equip servo from any maker.
   Inet RC Alloy Knockoffs
A quick and low cost way to spice up your truck. Custom knockoffs for your wheels are CNC machined out of high quality 6061 aluminum. Available in a set of 4 in various colors!
   Inet RC Alloy Rod Ends
The ultimate rod end for your truck! CUSTOM made CNC machined aluminum rod ends similar to Kyosho (6.8mm ball 3mm hole 8-32 thread). Custom threads can also be ordered. Check out addition picture which shows it mounted on a 5/16" link!
   RCGUY adjustable motor mount
Allows custom sized pinions in your Clods gear boxes.
   RC Mayhem Quick Release Battery Mount Kit
N/A
   Thunder Tech Racing Axle Tube Brace Combo Kit
This kit is a combination of the Aluminum Knuckle Brace & Carbon Fiber Outer Axle Tube Brace Kits.
   GPM Racing Drive Shaft Tube with C Hub
Replaces the stock tubes perfectly. These tubes will increase the strength of your Clod or Bullhead significantly. Bearings support kingpins for super smooth steering action.
   GPM Racing Gear Box with Adjustable Motor Mount
This gearbox will increase the strength of your Clod or Bullhead significantly
   GPM Racing Wheel Drive Hub
Set of four drive hubs. These are much stronger than the Stock ones.
   New Era Models Rear Sway Bar Kit
Rear Sway Bar Kit.
   JPS Axle Tube
Axle Tube
   Hooter Chassis Adjustable motor Mount
No Info available at this time.
   Thunder Tech Racing Adjustable Motor Mount kit
Allows you to go from a 6 tooth to 16 tooth pinion with no modifications.
   Thunder Tech Racing Aluminum knuckle reinforcement bracket kit
Aluminum knuckle reinforcement bracket kit (Fits All Clodbusters). Kit includes 4 aluminum brackets & mounting hardware kit.
   Thunder Tech Racing Carbon fiber outer axle tube brace kit
arbon fiber outer axle tube brace kit (Fits any Clodbuster w/4link). Kit includes 4 Carbon fiber braces & mounting hardware kit.
   JPS Bumper
Bumper made from Billet Aluminum.
   New Era Models Front Bumper
Front Bumper.
   JPS Gear Box
Gear Box (Billet Aluminum).
   JPS Axle Tube with Steering
Comes with stainless bearings for steering pivot. Long lasting and smooth steering control.
   ESP Aluminum Body Mounts Grave Digger
Want to put the Gravedigger body on your Tamiya Clodbuster or Bullhead? ESP makes it easy with this aluminum body mount set. Extra-tall to accommodate for the Gravedigger body, the aluminum construction is stronger than the stock plastic body mounts and eliminates the chance of breakage.
   ESP Clodzilla Antisway Bar Kit
This is the swaybar assembly for the Clodzilla kits.
   ESP Aluminum Low-Profile Body Mounts
Aluminum Low-Profile Body Mounts.
   ESP Aluminum Hi-Lift Body Mounts
This is a set of aluminum body mounts for the Tamiya Clodbuster or Bullhead. These mounts eliminate the breakage problems of the stock plastic mounts and also lift the body an additional 5/8".
   ESP Aluminum Skid Plate
This is an aluminum skid plate for the Tamiya Clodbuster and Bullhead kits. It is designed to be used with ESP's Lower Bumper. This skid plate provides protection for the gear case.
   ESP Clodzilla Wheelie Bar
ESP's Clodzilla adjustable wheelie bar for the Tamiya Clodbuster and Bullhead bolts directly onto the stock gear case and enables the truck to wheelie or climb without going over backwards.

 

 

 

ClodParts.com does not sell any of the products listed on this site. ClodParts.com is just an information collection on parts for the Clod Buster. Any sales between seperate stores listed on this site are between you and that store.