Click Here To Visit This Fine R/C Site!

    Home
    About
    News
    Forums
    Link Me
    Contact

  Products
    Chassis
    Suspension
    Shocks
    Hop-ups
    Gears
    Steering
    Bearings
    Wheels
    Tires
    Foam Inserts
    Motors
    Batteries
    Electronics
    Servos
    ESC's
    Bodys
    Decals
    Stock Parts
    Old School Parts

  View by Company


  Discontinued Parts
    Flash Back Stories

Suspension Break Down
 - 4-Link Kits  
 - CNCLink Kits  
 - Aluminim Stock Link Kits  
 - Steering-Mount Kits  
 - Upper Link Mount Kits  
 - Shock Mounts  
 - Cantalever Kits  
 - Stabalizers  
 - Lift Kits  

ClodParts.com |

 

   Crawford Performance Engineering High Clearance Lower 4-Link Kit (16" WB)
High clearance 6061 aluminum 4-link bars designed to optimize ground clearance for your crawler.
   Crawford Performance Engineering Terminator Upper 4-Link Mount
Add these Terminator style skull 4-link mounts to your truck for that unique look! These mounts use the stock steering servo location and give that different look for those not wanting to run our high performance CNCd CPE-4LMTHD versions.
   RCGUY Combination Link/Shock Mount/C-Hub Brace
These Delrin plastic shock mounts-C-hub braces solve 3 problems at once. They serve as a super tough shock/cantilever mount and lower 4 link mount while also reinforcing the weakest point on the Clod Buster axle tube, the C-hub. These are the same mounts used on our Venom and V2.2 cantilever
   Inet RC Polished Upper Links
CNC machined from 6061 aluminum, these beefy 5/16 upper links mount from the chassis to our upper link mount. Links are 124mm in length with 8-32 threads. Perfect for our yellow ends or Kyosho ends. Set of 4 comes with 8-32 studs. 
   Inet RC Upper Links
Brushed aluminum. CNC machined from 6061 aluminum, these beefy 5/16 upper links mount from the chassis to our upper link mount. Links are 124mm in length with 8-32 threads. Perfect for our yellow ends or Kyosho ends. Set of 4 comes with 8-32 studs.
   Inet RC Polished Lower Integrated Links
CNC machined from 6061 aluminum, these beefy 5/16 lower links allow for integrated shock mounting. Reduces slop. Links are 136mm in length with 8-32 threads. Perfect for our yellow ends or Kyosho ends. Set of 4 comes with 8-32 studs.
   Inet RC Lower Integrated Links
Brushed aluminum. CNC machined from 6061 aluminum, these beefy 5/16 lower links allow for integrated shock mounting. Reduces slop. Links are 136mm in length with 8-32 threads. Perfect for our yellow ends or Kyosho ends. Set of 4 comes with 8-32 studs.
   Hot Racing Upper Link Round Multi Mount
This is the optional Hot Racing Aluminum Universal Upper Link Mount for the Clod Rock Clawer series.
   Hot Racing Upper Link Narrow Multi Mount
This is the optional Hot Racing Aluminum Universal Narrow Upper Link Mount for the Clod Rock Clawer series.
   RCGUY Adjustable Upper 4-Link Mount
This upper 4 link mount will not twist or break under the toughest competition conditions. 5 hole adjustment for easier builds. 6061-t6 aluminum and alloy hardware. Simple to install. Sold by the pair. <BR><BR>Fully recommended by ClodParts.com
   New Era Models Long Wheelbase
Long Wheelbase (14) 4 Link Suspension.
   Crawford Performance Engineering Upper 4-Link Mounting Bracket Set
These aluminum upper 4-link mounting brackets are a direct bolt-on to your stock Clodbuster gear cases and provide a fixed point for mounting of the upper 4-link suspension arms. Made from 1/8 thick aluminum, these have adjustable mounting points to allow for fine tuning for your suspension. All necessary installation hardware is included.
   Crawford Performance Engineering Machined Lower 4-Link Set
These CNC machined 6061 aluminum lower 4-link bars allow for the secure mounting of both sway bars and/or shocks in a variety of locations.
   Crawford Performance Engineering 17 Inch Claw Aluminum 4-Link Kit (60/40)
17 inch aluminum 60/40 4-link kit.
   Crawford Performance Engineering 17 Inch Claw Aluminum 4-Link Kit (50/50)
17 inch aluminum 50/50 4-link kit.
   RCGUY 165mm CNC Link
165mm (6.51inches) CNC machined lower links.
   RCGUY 137mm CNC Link
137mm (5.40inches) CNC machined lower links.
   RCGUY 124mm CNC Link
124mm (4.87iches) CNC machined lower links.
   New Era Models Bent Rods (4) for More Articulation
SCT525 Bent Rods (4) for More Articulation
   Crawford Performance Engineering Upper shock spacer kit
This kit works on all our chassis and provides a " spacer between the upper shock mount and the chassis side plate. These machined upper shock mounting spacers have a " OD with a 3/16" OD turned area for mounting inside the shock and are drilled for 4-40 mounting hardware. This kit includes enough spacers for 4 shocks.
   Crawford Performance Engineering " Clodbuster Suspension Lift Kit
This kit increases clearance between your steering linkage and chassis, while making your truck 1/2" taller! Our kit comes with four mounting plates and all required mounting hardware.
   New Era Models Standard Wheelbase
Standard Wheelbase, 4 link suspension: 8 Rods & Heavy Duty Rodends, 4 CNC machined Shock Mounts.
   Crawford Performance Engineering 16" Wheelbase Crawler 4-link Suspension Arm Set
This kit when used in conjunction with our custom center chassis will result in a wheelbase of approximately 11". 14", or 16" using Clodbuster  axles. Balls are sized for #4-40 mounting hardware. Comes in Aluminum or Carbon fiber.
   Crawford Performance Engineering 14" Short Wheelbase 4-link Suspension Arm Set
This kit when used in conjunction with our custom center chassis will result in a wheelbase of approximately 11". 14", or 16" using Clodbuster  axles. Balls are sized for #4-40 mounting hardware. Comes in Aluminum or Carbon Fiber.
   Crawford Performance Engineering 12" Short Wheelbase 4-link Suspension Arm Set
This kit when used in conjunction with our custom center chassis will result in a wheelbase of approximately 11". 14", or 16" using Clodbuster  axles. Balls are sized for #4-40 mounting hardware. Comes in Aluminum or Carbon Fiber.
   RC4WD Super Heavy Duty Shock Mounts fit 1/4" Links
These shock mounts are designed to be installed on your 4 links rods/shafts
   RC4WD Hexagon 4 Links Suspension Kit
Hexagon 4-Links Suspension Kit (with drilled holes for shock mount)
   New Era Models Suspension Package for SCT103 Frame
Suspension Package for SCT103 Frame. Including SCT702, SCT703-2, SCT705, SCT707, (2) SCT822.
   New Era Models Two Upper 4 link suspension mount
Super Clodbuster Upper 4 Link Suspension mount with hardware. Will also work with original clodbuster and plastic gearcases.
   New Era Models Upper 4 link suspension mount
Super Clodbuster Upper 4 Link Suspension mount with hardware. Will also work with original clodbuster and plastic gearcases.
   New Era Models Monster Duty extended Kit
Super Clodbuster MONSTER DUTY extended Wheelbase 4 link suspension(13 inch weelbase). 8 Rods (.312 inch 8mm) & Heavy Duty Rod Ends & Hardware 4 CNC machined Shock Mounts. Will also work with original clodbuster.
   New Era Models Cantilever Kit(4 Levers and Links)
Super Clod Cantilever Kit (4 Levers and Links) (With Bearings)
   Team PRP upper 4-link mounts
CNC precision machined aluminum upper 4-link mounts for Clod Buster axles. Incorporates anti-wear cross link bushings and PIT BULL locking system stays locked in! Used to win the 2004 NR/CTPA Worlds by driver, Jerry Garland.
   Thunder Tech Racing CNC Lower 4-Link Bar kit
Includes 4 Aluminum 4-link bars, 8 ball ends and hardware.
   Thunder Tech Racing Upper Aluminum 4-link bar kit
Kit includes 4 link bars & heavy duty ball ends, conical washers and mounting hardware.
   G-made MC Nylon Heavy Duty Upper Links Mount
MC Nylon upper links mount has been specially designed to fix firmly even after extreme driving
   G-made Ultra Heavy Duty Dragoon 4 Links Set
Using Duralumin 7075 and thicker and stronger body, It will not be bent or broken by impacts
   Xreme Racing Upper 4-Link Gearbox Support (2)
This item is a must for anyone wanting to turn there Clod into a racer or crawler. This item is used to add a 4-link suspension to your Clod. Item will allow you to mount the links to the upper portion of your gearbox.
   Xreme Racing Carbon Fiber Shock Mount
This item is used to add a shock to the axle tube. Can also be used as an axle support. Now in four carbon fiber colors.
   JPS Aluminum Suspension Arms
Aluminum suspension arms to replace the plastic stock ones.
   Inet RC Polished Upper Link Mount
CNC machined out of aluminum, these upper link mounts fit snug and tight thanks to our proprietary anti-spin system. POLISHED to a SHOW QUALITY mirror finish! Comes as a pair with 3mm screws.
   ESP Clodzillalever Floating Shock System
Designed to be used exclusively with the CLODZILLA 2 chassis and Multi-Link suspension, the new CLODZILLALEVER kit incorporates a radical full floating shock design wich creates a true rising rate action in the suspension for incredible handling. A.K.A. Clodzillalever II Cantilever Kit
   Thunder Tech Racing Lower shock mount kit
Lower shock mount kit (Fits All Clodbusters)
   JPS Shock Mounting Kit
Shock Mounting Kit.
   ESP Clodzilla II Long Wheelbase Suspension Kit
This is the Clodzilla II long wheelbase suspension kit for the Tamiya Clodbuster and Bullhead kits. It is based on the same race technology used on the standard multi-link suspension kit.
   ESP Clodzilla III Cantilever Kit
Shocks are mounted inboard above the chassis for more centered weight Increases wheel travel and reduces ride height for a lower center of gravity. Parts made of aluminum. Specially designed for the CLODZILLA III full race chasis.
   ESP Clodzilla IV Cantilever Kit
This is the cantilever kit for the Clodzilla IV.
   ESP Multi-Link Suspensin Kit
This is the multi-link suspensin kit for the Clodzilla.
   ESP Suspension Stabilizers
Suspension Stabilizers.
   ESP Suspension Lift Kit
This is ESP's popular suspension lift kit for the Tamiya Clodbuster or Bullhead.
   New Era Models Cantilever Kit
Cantilever Kit (4) With Bearings.

 

 

 

ClodParts.com does not sell any of the products listed on this site. ClodParts.com is just an information collection on parts for the Clod Buster. Any sales between seperate stores listed on this site are between you and that store.