Click Here To Visit This Fine R/C Site!

    Home
    About
    News
    Forums
    Link Me
    Contact

  Products
    Chassis
    Suspension
    Shocks
    Hop-ups
    Gears
    Steering
    Bearings
    Wheels
    Tires
    Foam Inserts
    Motors
    Batteries
    Electronics
    Servos
    ESC's
    Bodys
    Decals
    Stock Parts
    Old School Parts

  View by Company


  Discontinued Parts
    Flash Back Stories

Wheels Break Down & Accessories
 - Plastic Wheels  
 - Aluminum Wheels  
 - Beedlock Wheels  
 - Alternative Wheels  
 - Wheel Wideners  
 - Wheel Adaptors  
 - Knock Offs  
 - Wheel Accessories  

ClodParts.com |

 

   Crawford Performance Engineering 3/4" Offset 12-12mm Wheel Spacers
Use these wheel spacers to extend your Clodbuster axles 3/4" per side. These CNC machined 6061 aluminum spacers allow for the use of the stock drive hex, provide a 3/4" offset per side, and work with any wheel having a 12mm hex drive system (2.2 sized wheels).
   Crawford Performance Engineering 3/4" Offset Machined Wheel Spacer
CPE is now offering a CNC machined 3/4" offset wheel spacer for your Clodbuster. This design still allows for the use of the stock drive hub and wheel, but eliminates having to drill a hole pattern in your wheel. This kit also provides the added width necessary for high-speed stability.
   Crawford Performance Engineering 1.0 Inch Offset 12-14mm Wheel Adapters (CVD)
hese wheel adapters allow for the use of any 14mm hex drive wheel on your Clodbuster crawler. CNC machined from 6061 aluminum, these spacers allow for the use of the stock 12mm drive hex and provide a 1" offset per side.
   Hot Racing Silver 23mm adapter 15mm offset (2)
No modification of wheels needed. Simple bolt on installation. 6061 aluminum construction, silver in color 60% larger than stock for unbeatable performance Add 15mm on each side of your clod Easy installation
   Crawford Performance Engineering 1.0 Inch Offset 12-14mm Wheel Adapters
Use these wheel adapters to allow for the use of any 14mm hex drive wheel on your Clodbuster crawler. These CNC machined 6061 aluminum spacers allow for the use of the stock drive hex and provide a 1" offset per side, and work with any wheel having a 14mm hex drive system (Maxx sized wheels).
   Crawford Performance Engineering Wheel Spacers
Kit will increase vehicle stability by increasing overall wheel width.
   Thunder Tech Racing Wheel Widener Kit
Adds 3/4" overall width to Clodbuster / Bullhead and Juggernauts.
   ESP ClodBuster Wide Ride Kit
This kit will make your truck a full 2" wider than the stock machine.
   RC Mayhem Road Hog 3/4" Wheel Offset Kit
Installing This Kit Will Tighten Steering Radius and Increase Cornering Speed and Stability. Better Handling for all Track Conditions.

 

 

 

ClodParts.com does not sell any of the products listed on this site. ClodParts.com is just an information collection on parts for the Clod Buster. Any sales between seperate stores listed on this site are between you and that store.